Udemy

Embedded Systems Bare-Metal Programming Ground Up™ (STM32)

Name: Embedded Systems Bare-Metal Programming Ground Up™ (STM32)
Price: 479 INR
Availability: InStock

No Libraries used, Professional CMSIS Standard, ARM Cortex, ADC,UART,TIMERS, DMA,SPI,I2C,RTC,GPIO etc.

Embedded Systems Bare-Metal Programming Ground Up™ (STM32) is an intermediate-level online course from Udemy in Embedded Systems. It is structured in 20 modules with 8 stated learning outcomes, over 24.5 hours. It costs ₹479, certificate included. Learners rate it 4.6/5 from 3.9K ratings on Udemy, with 25.9K enrolled.

Part of our Embedded Systems courses collection, where we compare it against 5 other courses.

★★★★★4.6(3.9K reviews) 25.9K learners English

Course highlights

Provider	Udemy
Duration	24.5 hours
Level	Intermediate
Mode	Self-paced
Language	English
Certificate	Yes — shareable certificate
Instructor	Israel Gbati
Rating	4.6★ (3.9K reviews)
Learners	25.9K
Price	₹479 ₹3,329

What you’ll learn

Write firmware using only bare-metal embedded-c

Understand the Cortex-M Architecture

Write Analog-to-Digital Converter (ADC) drivers using bare-metal embedded-c

Write PWM drivers using bare-metal embedded-c

Write UART drivers using bare-metal embedded-c

Write TIMER drivers using bare-metal embedded-c

Write Interrupt drivers using bare-metal embedded-c

Write SPI drivers using bare-metal embedded-c

Level and time commitment

Udemy lists this course at Intermediate level.

It assumes you already have the basics of the subject and want to go deeper, rather than starting from zero.

Time commitment: 24.5 hours.

It is self-paced, so that figure is the material, not a fixed schedule.

What this course covers

20 modules

The 20-part outline Udemy publishes for this course, across 24.5 hours.

Module 1 · Getting Started - Constructing Peripheral Registers from Memory Addresses

Module 2 · General Purpose Input/Output(GPIO)

Module 3 · Universal Asynchronous Receiver-Transmitter(UART)

Module 4 · Analog to Digital Conversion (ADC)

Module 5 · Developing the SystemTick(SysTick) Timer Driver

Module 6 · General Purpose Timers

Module 7 · Interrupt Programming

Module 8 · Direct Memory Access (DMA) Driver Development

Module 9 · Inter-Integrated Circuit (I2C)

Module 10 · Serial Peripheral Interface (SPI)

Module 11 · Start of Old Version of the Course - Introduction

Module 12 · Set Up

Module 13 · General Purpose Input/Output(GPIO)

Module 14 · Writing Bare-Metal C Code with STM32CubeIDE

Module 15 · Universal Asynchronous Receiver-Transmitter(UART)

Module 16 · System Tick and General Purpose Timers

Module 17 · Interrupts Programming

Module 18 · Analog to Digital Conversion (ADC)

Module 19 · Interfacing with a Liquid Crystal Display (LCD)

Module 20 · Inter-Integrated Circuit (I2C)

What learners rate it

4.6

★★★★★

3.9K ratings

Rated 4.6/5 by 3.9K learners on Udemy (checked 6 Oct 2026).

This rating is collected by Udemy from its own enrolled learners. We reproduce it as reported and do not accept paid or incentivised reviews. See it on Udemy →

How this page is put together

Compiled by the CoursesGlobal editorial desk. Fees, ratings, duration and certificate details for the 1 course shown are read directly from Udemy course pages — we never estimate a price or a rating. Last verified 6 October 2026.

How we compare and rank courses · Our review policy · Affiliate disclosure

Compare with alternatives

Same topic, different trade-offs — here's who runs each one and what it's best at.

Course	Provider	Rating	Price	Duration	Why pick this one
Embedded Systems Bare-Metal Programming Ground Up™ (STM32) This	Udemy	4.6★	₹479	24.5 hours	Most popular — 25.9K learners
Introduction to the Internet of Things and Embedded Systems	Coursera	4.7★	Check price	11h 55m	Highest rated (4.7★ from 13.4K reviews)	View ↗
Introduction to Embedded Systems Software and Development Environments	Coursera	4.5★	Check price	9h 1m	For learners past the basics · 9h 1m	View ↗
Embedded Systems with 8051 & Embedded C	Udemy	4.5★	₹459	5.5 hours	Cheapest paid option (₹459)	View ↗

See all Embedded Systems courses →

Where Embedded Systems leads

Roles we map to Embedded Systems on CoursesGlobal. This is our own mapping of subject to job, not a placement claim by Udemy.

Engineer

Browse every course we track for one of these — courses for engineers.

Common questions

How much does Embedded Systems Bare-Metal Programming Ground Up™ (STM32) cost?

It is listed at ₹479 on Udemy, last checked 6 October 2026. Course prices change and providers run discounts, so treat this as the list price and confirm on the provider page.

Does Embedded Systems Bare-Metal Programming Ground Up™ (STM32) come with a certificate?

Yes — Udemy lists a certificate on completion. It is a course certificate, not a formal qualification or university credit.

How long does Embedded Systems Bare-Metal Programming Ground Up™ (STM32) take?

Udemy lists it at 24.5 hours. It is self-paced, so that is the volume of material rather than a deadline — how long it actually takes depends on the hours you put in each week.

Is Embedded Systems Bare-Metal Programming Ground Up™ (STM32) suitable for beginners?

Udemy lists it at Intermediate level, so it assumes some grounding in the subject already. If you are starting from zero, a beginner-level course in the same topic is the better entry point.

What does Embedded Systems Bare-Metal Programming Ground Up™ (STM32) cover?

It is organised into 20 modules, starting with Getting Started - Constructing Peripheral Registers from Memory Addresses and going on to General Purpose Input/Output(GPIO), Universal Asynchronous Receiver-Transmitter(UART), Analog to Digital Conversion (ADC), Developing the SystemTick(SysTick) Timer Driver, among others. The full outline is on this page.

Who teaches Embedded Systems Bare-Metal Programming Ground Up™ (STM32)?

Israel Gbati, as listed by Udemy.